PRODUCTS

Products.

The production capacity of FMA reaches 100 ton per single piece and 40.000 tons/year.

During the years it has specialized in carbon steel, alloy steel, stainless steel, duplex, superduplex and special alloys. Forgiatura Moderna Arese produces qualified forgings which, following heat treatment and machining, are internally tested, with the possibility of carrying out UNI CEI EN ISO / IEC 17025 accredited tests in the internal laboratory.

Rings, shells and flanges

Rings, shells and flanges

Maximum Diameter: 8000 mm.
Maximum Height: 2600 mm.

Shafts and pinions

Shafts and pinions

Maximum Length: 20.000 mm.
Maximum Flange: 3.500 mm.

Discs and wheels

Discs and wheels

Maximum Diameter: 4.300 mm
Maximum Weight: 100 tons.

prodotti blocchi

Blocks and plates

Maximum Weight: 100 tons.

Bars and pipes

Bars and pipes

Maximum Length: 20.000 mm.

Special products

Special products

Maximum Weight: 100 tons.

Material List

Forgiatura Moderna Arese regularly produces high quality forged pieces in the following materials:

  • ASME SA105/ASTM A105

  • ASME SA266/ASTM A266

  • ASME SA350 LF2/ASTM A350 LF2

  • UNI EN 10250-2 S355J2G3 – 20Mn5 – 28Mn6

  • UNI EN 10083 C22-C30-C45-C50-C60

  • UNI EN 10222-4 P250GH/P285NH-GH/P355NH-GH/P420NH-GH

  • ASTM A694 F52/F60/F65/F70

  • ASTM A350 LF6

  • ASME SA182/ASTM A182 F1-F5-F11-F22-F22V

  • AISI 4130-4140-4330-4340

  • UNI EN 10250-3 25CrMo4-34CrMo4-42CrMo4-34CrNiMo6-30CrNiMo8

  • ASME SA723 GR.1-2-3

  • UNI EN 10083 39NiCrMo3

  • UNI EN 10084 18CrNiMo7-6

  • UNI EN 10085 31CrMoV9

  • ASME SA350 LF3/ASTM A350 LF3

  • ASME SA508/ASTM A508 GR.1-2-3

  • ASME SA707/ASTM A707

  • ASME SA182/ASTM A182 F304-F304L-F304LN-F310-F316-F316L-F316LN-F316Ti-F321-F347-F347H

  • UNI EN 10088/10250-4/10222-5 X5CrNi18-10, X2CrNi19-11, X15CrNi25-21, X5CrNiMo17-12-2, X2CrNiMo17-12-2, X2CrNiMo17-11-2, X6CrNiTi18-10, X6CrNiNb18-10, X8CrNiNb18-10

  • ASME SA182/ASTM A182 F44-XM19

  • X8CrMnN18-18

  • ASME SA182/ASTM A182 F6-F6-F6NM-F91-F92

  • UNI EN 10088/10250-4 X12Cr13, X3CrNiMo13-4, X22CrMoV12-1, X4CrNiMo16-5-1,X4CrNi16-4, X10CrMoVNb9-1

  • 17.4PH – 15.5PH

  • ASTM A705 GR.630

  • ASME SA182/ASTM A182 F51-F60-F53-F55

  • UNI EN 10088/EN 10250-4 X2CrNiMoN22-5-3, X2CrNiMoN25-7-4, X2CrNiMoCuWN25-7-4

  • Inconel 625-718-825